West Epoxy System

These resins are much stronger than polyesters. High performance fabrics such as carbon fibre and kevlar are used to give excellent strength to weight structures as in aircraft,performance boats and cars. Epoxy resin is much harder,chemical resistant and adheres better than polyester resins. West Multi Purpose Resin is a clear, light-amber, low viscosity epoxy, which, when mixed with the hardener, is formulated to wet out wood, fibreglass and a variety of metals. It can be cured in a wide temperature range to form a high strength solid with excellent moisture resistance. A superb adhesive, 105 Resin will fill gaps and bridge voids when modified with fillers and can be sanded and shaped afterwards. With roller applications, it possesses excellent wet film characteristics by flowing out and self levelling without fisheyeing. The epoxy mix cures to a clear finish. Supplied in packs containing the hardener. SLOW HARDENER KITS NOW AVAILABLE.

Can be used to extend working times to 30 minutes.

Used with epoxy for coating applications where an extremely clear finish is desired especially in humid conditions. Also contains an ultra violet inhibitor to protect the resin from sunlight.

Each reseal able pack contains epoxy resin,hardener,406 & 407 fillers, tools, gloves, cleaning pads and instructions.Ideal for repair work.

The calibrated pumps which mount directly onto the resin &hardener containers to ensure accurate dispensing to the correct ratios.301A for A pack. 301B for B pack.301C for C pack.303A pump for special coating hardener.

A blend of cellulose fibres used as a thickening agent for bonding applications.Add to epoxy mix at 4%-16%by weight. Colour:off white.

A blended micro-balloon based filler used to make fairing putties which are easy to sand down but remain strong. Add to epoxy mix at 20%-40%by weight. Colour: reddish brown.

For maximum bond strength in hardware bonding. It can also be used for filleting and gap filling applications. Add to resin at a rate of 35%to 60%. Colour: off white

A blend of fillers for use in filleting where a natural finish is required. For colour adjustment alcohol or water based stains may be added to filler and allowed to dry before mixing into resin. Add to epoxy mix at 15%-25%by weight. Colour: tan.

Micro cellular hollow fibreglass particles for adding to resin as reinforcement. Easy to sand lightweight filler.

A low density filler for creating an easily worked fairing compound for large areas. Easiest filler to rub down and holds a feathered edge. Add to epoxy mix at 7%-16%by weight. Colour: tan.

A blend designed to improve the moisture exclusion effectiveness of West Epoxy and to combat osmosis. Also provides a barrier coating to overcome gelcoat blistering and increase abrasion resistance. Add 20%to 25%by weight

Add to epoxy mix at 3%-5% by weight to provide a base colour for a final finish system.

A fine black powder added to the mixed epoxy to provide a low friction exterior coating with increased scuff resistance. Commonly used on rudders, centreboards or the bottoms of racing craft.

These 22mm fibres are much stronger and stiffer for their weight than nearly all engineering materials. Used where space or size is confined.

A finely woven fabric treated with a release agent to which epoxy will not adhere. Excellent for providing a release and reducing subsequent sanding prior to applying more epoxy.

A specially blended cleaning solvent for removing uncured epoxy from tools, workbenches etc. Also excellent for cleani ng contaminants from cured epoxy surfaces.

A safe easy to use cleaning solution developed to remove uncured epoxy from tools workbenches, minipumps etc. Can also be used to wash off the wax like amine blush which can occasionally appear after applying the epoxy in damp conditions.

Ideal for coating epoxy to small areas 75mm long x 45mm core.

Long lasting high density polyurethane foam roller on a plastic core.

Re-usable 45mm wide roller frames for use with roller covers.

Lightweight, re-usable squeegees for fairing and filling applications.

Flexible plastic roller pan allows cured epoxy to ‘pop out ’ so the pan can be re-used.