Opening hours: Mon-Fri, Shop: 08:00 - 16:45, Office: 08:30 - 17:00

Welcome to CFS Fibreglass

0 items
£0.00
0 items Order Value £0.00 Checkout

exc. VAT

inc. VAT

West System Epoxy: The Complete Guide to Marine-Grade Epoxy for Boat Building and Repairs

West System Epoxy Product Range

 

 

 

 

 

 

 

 

If you have ever walked around a boatyard, a canoe-building workshop or a surfboard shaping bay, you have almost certainly seen a West System can or pump dispenser. West System Epoxy is one of the best-known names in marine epoxy, and for good reason. It is strong, durable, versatile and consistent from one batch to the next.

In this guide, we explain what West System Epoxy is, how the system works, which products you need for different jobs, and how to get the best results. Whether you are building a boat from scratch, repairing a damaged hull or tackling a woodwork project, you will find everything you need to get started.

What Is West System Epoxy?

West System Epoxy is a high-performance, two-part epoxy resin system. It is used mainly for boat building, boat repair and other fibreglass and composite applications. The system is made up of a resin and a hardener. When you mix them, they react and cure into a tough, waterproof solid that bonds strongly to wood, fibreglass, metal and many other materials.

Professionals and hobbyists both rely on it for its consistent quality and long-lasting results. Because the resin and hardener are sold as a matched system, you can choose the combination that suits your project, your workshop temperature and how much working time you need.

Why Choose West System Epoxy?

Exceptional strength and durability

A properly mixed and cured West System epoxy forms a strong, moisture-resistant bond. That is why it is so widely used in marine settings, where materials face constant exposure to water, humidity and stress.

Versatility across materials

West System Epoxy can be used to:

  • Laminate and bond timber, including cold-moulded and strip-planked construction
  • Saturate and bond fibreglass cloth and other reinforcements
  • Seal and waterproof wood before painting or varnishing
  • Fill, fair and shape surfaces
  • Repair cracks, gouges, delaminated areas and damaged edges

Flexible mixing and working times

Different hardeners give different cure speeds, so you can match the product to the job. A faster hardener suits cooler conditions and quick repairs. A slower hardener gives you more working time for large laminations or warm weather. Check the technical data for each product before you buy.

Trusted by professionals and hobbyists

West System is respected for its consistent results. Its range of compatible fillers, additives and accessories also means you can usually find a solution for each stage of a project in one system.

What's in the West System Range?

The full range stocked by CFS Fibreglass covers everything from the base resin to the tools you need to apply it. Here is a quick tour.

Resins and hardeners

The heart of the system. Browse our West System Epoxy resins and hardeners to choose the right resin and hardener combination in the pack size that suits you, from small repair packs to larger quantities for bigger builds.

Fillers and additives

Fillers change the properties of mixed epoxy. They thicken it for bonding and filleting, lighten it for fairing, or add strength and abrasion resistance. Our West System fillers let you tailor the epoxy to the task. Typical uses include:

  • Gap filling and bonding: thickened epoxy holds its shape in gaps and joints
  • Filleting: creating smooth, strong radiused joints between panels
  • Fairing: low-density fillers that sand easily for a smooth surface

Repair kits

New to epoxy, or just need to fix something quickly? Our West System repair kits bring together what you need for common repair jobs in one convenient pack.

Pigments

Want a coloured finish or a more consistent appearance? West System epoxy pigments can be added to mixed epoxy to colour it.

Peel Ply

A good finish starts with good preparation. West System peel ply fabric is applied over wet laminate to leave a clean, textured surface that is ready for bonding or finishing.

Tools and solvents

Measuring and mixing accurately is the secret to a perfect cure. Our West System tools and solvents range includes the accessories that help you mix, apply and clean up with confidence.

How to Get the Best Results with West System Epoxy

Epoxy is forgiving in some ways and unforgiving in others. These practical tips will help you avoid common problems.

  1. Measure accurately. Epoxy cures through a chemical reaction, so the resin-to-hardener ratio matters. Always follow the ratio stated for your product, and consider using calibrated pumps or accurate scales and measuring cups.
  2. Prepare the surface. Surfaces should be clean, dry and sanded. Remove dust, grease, wax and any loose material before you apply epoxy.
  3. Mix thoroughly. Stir the resin and hardener together for the recommended time, scraping the sides and bottom of the pot, before adding any filler.
  4. Mind the temperature. Cure time depends heavily on temperature. Work within the recommended range, and pick a hardener that suits the conditions in your workshop.
  5. Mix in small batches. Epoxy generates heat as it cures. A large mass in a pot will cure faster than a thin layer spread on a surface, so mix only what you can use in the working time.
  6. Protect the cured surface. Cured epoxy is not stable in prolonged sunlight, so finish it with a suitable paint or varnish that provides UV protection.
  7. Plan your overcoating. Follow the manufacturer's guidance on timing between coats, and on cleaning or sanding the surface if the previous coat has fully cured.

For step-by-step help, read our fibreglass how-to guides and download the free West System information guides.

Safety First When Working with Epoxy

Epoxy is easy to work with, but it needs respect. Always wear suitable gloves, eye protection and appropriate clothing, and work in a well-ventilated area. Use a dust mask or respirator when sanding cured epoxy. Avoid skin contact, and read the product safety data sheet before you start. These are available to view and download from the Documents tab on the product listing page. For more general information, see our page on hazards and precautions.

Popular Projects for West System Epoxy

  • Boat building: hulls, decks, bulkheads and fillets in wood or composite construction
  • Boat repair: gelcoat cracks, damaged edges, keel and rudder repairs, and wood rot repairs
  • Fibreglass and composite work: laminating cloth and building up strong, light structures
  • Woodworking: sealing, gluing and coating timber that needs to withstand moisture
  • Canoes, kayaks and paddleboards: durable, waterproof finishes on lightweight craft

West System Epoxy vs Other Epoxy Resins at CFS

CFS Fibreglass stocks a wide range of epoxy resins, so you can choose the right product for your specific application. If you are working on a marine or structural project, West System is an excellent choice. If your project is different, you may also want to look at Petram epoxy resin, PureCast water clear epoxy resin for casting and art, or Surf Pro epoxy resin for surfboards. Not sure which is best for you? Our team is happy to help.

Frequently Asked Questions

What is West System Epoxy used for?

West System Epoxy is used for boat building, boat repair, fibreglass and composite work, and for bonding, coating and sealing wood. It is popular with both professionals and DIY enthusiasts.

Do I need a hardener with West System resin?

Yes. West System is a two-part system, so the resin must be mixed with a compatible hardener to cure. Different hardeners offer different working times, so choose the one that suits your project and conditions.

Can I use West System Epoxy on wood and fibreglass?

Yes. It bonds well to timber and fibreglass, and to many other materials when the surface is properly prepared.

Does West System Epoxy need to be painted or varnished?

In most outdoor and marine applications, yes. Cured epoxy needs a UV-protective coating such as paint or varnish to protect it from sunlight.

Can I add colour to West System Epoxy?

Yes. Pigments designed for use with West System epoxy let you colour the mixed resin.

Where can I buy West System Epoxy in the UK?

You can order West System Epoxy online from CFS Fibreglass with fast UK delivery. See our delivery information for details.

Buy West System Epoxy from CFS Fibreglass

CFS Fibreglass is a leading online supplier of GRP and fibreglass materials, and we are proud to offer the full West System range. From resins and hardeners to fillers, repair kits, pigments, peel ply and tools, you can get everything for your project in one place.

Shop the full West System Epoxy range now

Need advice on choosing the right products? Call us on 01209 821028 or email sales@cfsnet.co.uk. You can also contact us online. Our shop is open Monday to Friday, 08:00 to 16:45, and our office is open 08:30 to 17:00.

Published on 18 November 2026
Previous / Next Article