HALF A170 Facia Trim 1.5m Length

The HALF A170 Facia Trim in 1.5m length is the narrowest drip fascia profile in the range, designed for flat roofs where a smaller fascia depth or a tighter overhang is required. It directs rainwater clear of the fascia board at the eaves edge, preventing water from tracking back behind the roof edge and causing damage to the timber below.

The 1.5m half length is well suited to smaller roof areas, repair work, and bay roofs where a full 3m length would generate unnecessary waste. As with all profiles in the range, the A170 is supplied in light grey GRP and fixed using PU adhesive. Use the C1 Universal External Corner where the trim run meets an external corner. Compatible with B230 Raised Edge.

A complete range of trims designed for use with glassfibre, polymeric, single membrane and liquid applied flat roofing systems. High adhesion light grey finish suitable for flatroofing, pitched roofing, domestic and industrial applications. Supplied in 3 metre or 1.5 metre lengths. Brochure and method data available on request. PU adhesive is required for installation.

GRP roofing trims provide a practical, durable, and aesthetically pleasing solution for finishing fibreglass flat roofs and for other domestic and industrial applications. With their superior strength, resistance to the elements, and ease of installation, they help ensure a long-lasting, weather-tight roofing system. By combining functionality with modern design, GRP trims offer an excellent way to enhance the performance and appearance of fibreglass roofs.

Girth: 170mm

Depth: 65mm

Length: 1.5 metres