Drip Facias

Drip fascia trims form the finishing edge along the eaves of a flat roof, directing rainwater clear of the fascia board and preventing water ingress behind the roof edge. This range covers three profiles - A170, A200, and A250 - in both 1.5m (half-length) and full 3m lengths, with a C1 Universal External Corner piece to suit mitre-free external corners.

The A170 is the narrowest profile, suited to roofs with a smaller fascia depth or a tighter overhang requirement. The A200 is the most commonly specified drip fascia, providing a standard 200mm face with a drip detail at the lower edge. The A250 offers a larger face depth for roofs where additional coverage or a bolder edge detail is needed. All are supplied in light grey GRP and fixed using PU adhesive. Volume pricing is available on 3m lengths.