HALF A200 Drip Facia Trim 1.5m Length

The HALF A200 Drip Facia Trim in 1.5m length is the most popular drip fascia profile in the range, providing a standard 200mm face with a drip detail along the lower edge to throw water clear of the fascia board at the eaves. It's the default specification for the majority of domestic and light commercial flat roof projects where no unusual depth or overhang requirement applies.

The 1.5m half length suits smaller roof areas, repairs, and bay roofs. Supplied in light grey GRP and fixed using PU adhesive. Use the C1 Universal External Corner to finish any external corners along the eaves run.

A complete range of trims designed for use with glassfibre, polymeric, single membrane and liquid applied flat roofing systems. High adhesion light grey finish suitable for flatroofing, pitched roofing, domestic and industrial applications. Supplied in 3 metre or 1.5 metre lengths. Brochure and method data available on request. PU adhesive is required for installation.

GRP roofing trims provide a practical, durable, and aesthetically pleasing solution for finishing fibreglass flat roofs and for other domestic and industrial applications. With their superior strength, resistance to the elements, and ease of installation, they help ensure a long-lasting, weather-tight roofing system. By combining functionality with modern design, GRP trims offer an excellent way to enhance the performance and appearance of fibreglass roofs.

Girth: 200mm

Depth: 90mm

Length: 1.5 metres