D260 Fillet Trim 1.5m Length

For use where flatroof butts against existing wall and creates a 45 degree angle to deflect rainwater from existing 90 degree angle. Fits under section C.

Flanges: 80mm & 105mm
Height: 120mm
Girth: 260mm
Length: 1.5m

The D260 Fillet Trim in 1.5m length is the half-size option for smaller roof areas, repair sections, or where shorter runs are needed to minimise waste. The D260 profile features a 45° pre-formed fillet that fills the sharp internal angle at the junction between a flat roof deck and a vertical wall or parapet, allowing the GRP laminate or membrane to bridge the corner smoothly without bridging or delaminating over time.

At 260mm across its two flanges, the D260 is the mid-range fillet profile - larger than entry-level fillets but suited to the majority of domestic and light commercial upstand details. It is supplied in light grey GRP and fixed in position using PU adhesive before the roofing laminate is applied over it. The 1.5m length makes it easy to handle and transport, and offcuts can be used to fill short sections or work around obstacles.

GRP roofing trims provide a practical, durable, and aesthetically pleasing solution for finishing fibreglass flat roofs and for other domestic and industrial applications. With their superior strength, resistance to the elements, and ease of installation, they help ensure a long-lasting, weather-tight roofing system. By combining functionality with modern design, GRP trims offer an excellent way to enhance the performance and appearance of fibreglass roofs.

Flanges: 80mm & 105mm
Height: 120mm
Girth: 260mm
Length: 1.5m