C5 E280 Expansion Trim Closure

The C5 E280 Expansion Trim Closure is the purpose-made end cap for the E280 expansion joint trim, used wherever a run of E280 terminates - typically at the roof perimeter, where the expansion joint meets a drip fascia, raised edge trim, or wall fillet. Without a closure piece, the open end of the E280 rib presents an exposed void that is difficult to seal neatly and represents a potential point of water ingress.

The C5 is moulded to exactly match the E280 profile, slotting over the end of the trim run and bonding cleanly to the adjacent roofing laminate and perimeter trim. It is supplied in light grey GRP to match the linear trim range, and is fixed with PU adhesive. One C5 is required at each end of every E280 expansion joint run.

A complete range of trims designed for use with glassfibre, polymeric, single membrane and liquid applied flat roofing systems. High adhesion light grey finish suitable for flatroofing, pitched roofing, domestic and industrial applications. Supplied in 3 metre or 1.5 metre lengths. Brochure and method data available on request. PU adhesive is required for installation.

GRP roofing trims provide a practical, durable, and aesthetically pleasing solution for finishing fibreglass flat roofs and for other domestic and industrial applications. With their superior strength, resistance to the elements, and ease of installation, they help ensure a long-lasting, weather-tight roofing system. By combining functionality with modern design, GRP trims offer an excellent way to enhance the performance and appearance of fibreglass roofs.